To qualify. the FT70 has a built in USB port, no external USB chip required.
The radio must be in programming mode for this USB port to become active. Nicolas On Sat, 27 Mar 2021 at 07:43, Nicolas Pike <[email protected]> wrote: > The FT70 has a USB driver built in. Use the USB Cable that came with the > radio, or a USB cable that fits correctly as the radio socket is recessed. > The USB Port will not show up on your Mac until the Radio is in the > correct state for programming. > Follow the onscreen instructions exactly to ensure the radio is in the > correct state for download. > Happy to try and answer any further questions. > Nicolas > > On Sat, 27 Mar 2021 at 01:27, Lawrence Underwood <[email protected]> > wrote: > >> I’m having to use an adapter to plug in the USB to the MacBook. Could >> that be affecting things? When I enter the command in Terminal it says >> there is no such file or directory. >> >> The odd thing is that when I use this adapter with the BaeFeng it works >> just fine. >> >> Thanks again. >> >> >> On Mar 26, 2021, at 8:08 PM, Jim Unroe <[email protected]> wrote: >> >> On Fri, Mar 26, 2021 at 8:57 PM Lawrence Underwood <[email protected]> >> wrote: >> >> >> Do you know where I can download a driver? Is it a FTDI cable or some >> sort? >> >> >> >> On Mar 26, 2021, at 7:54 PM, Jim Unroe <[email protected]> wrote: >> >> On Fri, Mar 26, 2021 at 8:49 PM Lawrence Underwood <[email protected]> >> wrote: >> >> >> I am on a MacBook Pro 13 running 11.2.3. >> >> When I attempt to download the radio to Chirp the port that is auto >> populated is /dev/cu/.Bluetooth-Incoming-Port. >> When I put the radio into ADMS mode and attempt to download it I get >> ‘ERROR’ on the radio and a message stating that the radio did not respond >> on Chirp. I am using the cable supplied by Yaesu. >> >> Any ideas on how to get the radio to communicate with Chirp? >> >> Thanks. >> >> >> See if this helps. >> https://www.miklor.com/COM/UV_DriversMAC.php >> >> Jim KC9HI >> _______________________________________________ >> chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Lawrence at [email protected] >> To unsubscribe, send an email to >> [email protected] >> >> >> _______________________________________________ >> chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Nicolas at [email protected] >> To unsubscribe, send an email to >> [email protected] > >
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
