Yes, I understand that. When I put it into programming mode Chirp is not seeing the driver in the radio. It did once. Now it is not.
> On Mar 27, 2021, at 2:43 AM, Nicolas Pike <[email protected]> wrote: > > The FT70 has a USB driver built in. Use the USB Cable that came with the > radio, or a USB cable that fits correctly as the radio socket is recessed. > The USB Port will not show up on your Mac until the Radio is in the correct > state for programming. > Follow the onscreen instructions exactly to ensure the radio is in the > correct state for download. > Happy to try and answer any further questions. > Nicolas > > On Sat, 27 Mar 2021 at 01:27, Lawrence Underwood <[email protected] > <mailto:[email protected]>> wrote: > I’m having to use an adapter to plug in the USB to the MacBook. Could that > be affecting things? When I enter the command in Terminal it says there is > no such file or directory. > > The odd thing is that when I use this adapter with the BaeFeng it works just > fine. > > Thanks again. > > >> On Mar 26, 2021, at 8:08 PM, Jim Unroe <[email protected] >> <mailto:[email protected]>> wrote: >> >> On Fri, Mar 26, 2021 at 8:57 PM Lawrence Underwood <[email protected] >> <mailto:[email protected]>> wrote: >>> >>> Do you know where I can download a driver? Is it a FTDI cable or some sort? >>> >>> >>> >>>> On Mar 26, 2021, at 7:54 PM, Jim Unroe <[email protected] >>>> <mailto:[email protected]>> wrote: >>>> >>>> On Fri, Mar 26, 2021 at 8:49 PM Lawrence Underwood <[email protected] >>>> <mailto:[email protected]>> wrote: >>>>> >>>>> I am on a MacBook Pro 13 running 11.2.3. >>>>> >>>>> When I attempt to download the radio to Chirp the port that is auto >>>>> populated is /dev/cu/.Bluetooth-Incoming-Port. >>>>> When I put the radio into ADMS mode and attempt to download it I get >>>>> ‘ERROR’ on the radio and a message stating that the radio did not respond >>>>> on Chirp. I am using the cable supplied by Yaesu. >>>>> >>>>> Any ideas on how to get the radio to communicate with Chirp? >>>>> >>>>> Thanks. >> >> See if this helps. >> https://www.miklor.com/COM/UV_DriversMAC.php >> <https://www.miklor.com/COM/UV_DriversMAC.php> >> >> Jim KC9HI >> _______________________________________________ >> chirp_users mailing list >> [email protected] >> <mailto:[email protected]> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to Lawrence at [email protected] >> <mailto:[email protected]> >> To unsubscribe, send an email to >> [email protected] >> <mailto:[email protected]> > _______________________________________________ > chirp_users mailing list > [email protected] <mailto:[email protected]> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to Nicolas at [email protected] > <mailto:[email protected]> > To unsubscribe, send an email to > [email protected] > <mailto:[email protected]>_______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Lawrence at [email protected] > To unsubscribe, send an email to > [email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
