Per the CHIRP homepage, you need to use a different radio model to program the UV5X3:
UV-5RX3 (use Radioddity UV-5RX3 Ken, N2VIP > On Aug 6, 2022, at 21:38, K0LNY_Glenn <[email protected]> wrote: > > Hi, > I have a bTech UV5X3 and it seems all messed up, that is why I acquired it. > I can punch in simplex channels, but I cannot input duplex channels by hand. > Chirp will not read from the radio, and even though it is a tri-band, the > band button only toggles between 2M and 70Cm. > I was able to punch in a 1.5 M frequency and it worked on simplex. > But no matter what I do, Chirp says error reading from radio. > The cable works with the Baofengs I have. > Since the radio isn't toggling to the third band, I'm wondering if someone > flashed it with a UV5R image. > I'm not sure if it would work to upload to the radio with the proper image > if I can't download from it first. > Anyway, if someone has a backed original image of a UV5X3, I would much > appreciate a copy of it if you would. > Glenn > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Ken Hansen at [email protected] > To unsubscribe, send an email to > [email protected] > To report this email as off-topic, please email > [email protected] > Searchable archive: > https://www.mail-archive.com/[email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
