On Sat, Aug 6, 2022 at 10:39 PM K0LNY_Glenn <[email protected]> wrote: > > Hi, > I have a bTech UV5X3 and it seems all messed up, that is why I acquired it. > I can punch in simplex channels, but I cannot input duplex channels by hand. > Chirp will not read from the radio, and even though it is a tri-band, the > band button only toggles between 2M and 70Cm. > I was able to punch in a 1.5 M frequency and it worked on simplex. > But no matter what I do, Chirp says error reading from radio. > The cable works with the Baofengs I have. > Since the radio isn't toggling to the third band, I'm wondering if someone > flashed it with a UV5R image. > I'm not sure if it would work to upload to the radio with the proper image > if I can't download from it first. > Anyway, if someone has a backed original image of a UV5X3, I would much > appreciate a copy of it if you would. > Glenn
Images for many of the radios supported by CHIRP are available in the CHIRP repository. https://chirp.danplanet.com/projects/chirp/repository/show/tests/images The image for the BTech UV-5X3 is an original image taken from a radio while it was still in its factory state. Here is a direct link. https://chirp.danplanet.com/projects/chirp/repository/changes/tests/images/BTECH_UV-5X3.img Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
