Sometime the cable needs an older driver to perform. בתאריך יום ג׳, 30 במאי 2023, 21:16, מאת Stephen Hersey <[email protected] >:
> This bit might not be obvious; if your operating system recognizes the > cable as a serial COM port device, that's all you need on the OS side. > After that, it's a matter of telling CHIRP what radio and what COM port to > use. > > Steve > > -- > Steve Hersey N1XNX > [email protected] > ----- > "Any sufficiently advanced technology is indistinguishable from magic." -- > Clarke's Third Law > "Any technology distinguishable from magic is insufficiently advanced." -- > Benford's Corollary > "Any sufficiently advanced magic is indistinguishable from technology." -- > Charles Stross, *Dead Lies Dreaming* > “It's still magic even if you know how it's done.” -- Terry Pratchett > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to amnon at [email protected] > To unsubscribe, send an email to > [email protected] > To report this email as off-topic, please email > [email protected] > Searchable archive: > https://www.mail-archive.com/[email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
