On Sat, Apr 21, 2007 at 07:50:32PM +0200, Oliver Boehmer (oboehmer) wrote: > omar parihuana <> wrote on Saturday, April 21, 2007 7:32 PM: > > > Hi list, > > > > We're redesigning a small MPLS Network (about 30 PE Routers and 2 P > > Routers -Link between P-PE: Ethernet-), so far the IGP is OSPF, > > however ISIS was proposed too. What is the best? IS-IS or OSPF? and > > Why? regarding the small network. > > check the archives, this has been discussed before.. it boils down to > "use what you're most comfortable and familiar with", and as you're > using OSPF already, the choice should be clear.
Possibly the single most annoying difference is that Cisco uses the command "ip router isis <tag>" to activate isis on an interface, vs just "ip ospf" with no "router". Now imagine you're tired and trying to take isis off an interface, and instead of typing "no ip router isis" you accidentally type "no router isis", and guess what happens. :) -- Richard A Steenbergen <[EMAIL PROTECTED]> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
