David, Try hitting Ctrl-Shit-6 several times (with the x)
Arie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Coulson Sent: Wednesday, August 01, 2007 23:01 PM To: cisco-nsp@puck.nether.net Subject: [c-nsp] Terminals within Terminals Maybe I'm just not with it today, but I keep hitting this problem. I reverse telnet from one router into another. From the second router I run a command that runs for a while (e.g. pinging something with 10000 packets). if I want to stop it early I would just do Ctrl-Shift-6 x. Works great normally, however when I'm within reverse telnet it will drop the session and return me to the console of the router I came from. Am I missing something obvious, or is there another command that will send the command to stop the task I want? _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/