Ah ha - So very simple. I knew my brain wasn't working right today :-)
Brault, Ryan wrote: > Ctrl-Shift-6, Ctrl-Shift-6 x. Add another Ctrl-Shift-6 for each session > before hitting x. > > > Ryan Brault > Illinois Century Network, RTC4 > Illinois Department of Central Management Services > Kankakee, IL 60901 > 815-936-4647 > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of David Coulson > Sent: Wednesday, August 01, 2007 3:01 PM > To: cisco-nsp@puck.nether.net > Subject: [c-nsp] Terminals within Terminals > > Maybe I'm just not with it today, but I keep hitting this problem. > > I reverse telnet from one router into another. From the second router I > run a command that runs for a while (e.g. pinging something with 10000 > packets). if I want to stop it early I would just do Ctrl-Shift-6 x. > Works great normally, however when I'm within reverse telnet it will > drop the session and return me to the console of the router I came from. > > Am I missing something obvious, or is there another command that will > send the command to stop the task I want? > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/