I know one end is Cisco, a 7600/Sup720, no idea what code. The other end I have no clue. I added the mtu, no change as of yet. In 2.5 hrs I've gotten 1087 prefixes on one, in 1 hr I've gotten 631 on the other. I've never seen this move so slowly.
Jared Mauch wrote: > On Tue, Aug 21, 2007 at 12:42:14PM -0400, Jason LeBlanc wrote: > >> I'm wondering if I have something that is by design or if something else >> is slowing my routers down. I have two 2811s with 768 megs running >> 12.4(4)T3, each connected to different upstreams via fast ethernet. I'm >> using prefix lists to limit them to /22, but I should have enough ram >> for a full /24 view. My problem is that anytime I clear a neighbor it >> takes them hours to learn all the prefixes again, which has forced me to >> add static defaults to compensate. My cpu is 2-4% during this, so I >> can't see how its cpu bound. Anyone have any ideas? >> > > Enable "ip tcp path-mtu-discovery" globally. > > that should help. If they're also using a Juniper, > some much older code had some odd propogation properties. They > may need to upgrade code. I think this was back in 4.x or 5.x. > > - Jared > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
