> I've always used 2511s with no issues. We have Cyclades for unix box > consoles, but I prefer my IOS. 2511s are cheap on eBay too, I see no > reason to pay more per port for anything else.
We also prefer the 2511 for this, actually the 2511-RJ to avoid the octapus cables. The down-side is the general lack of SSH on the IOS versions that support the 2511s. Of course, if you plan to dial into a modem attached to the 2511, then that's not an issue. - Bob > Paul Stewart wrote: > > Hi folks... > > > > Looking for feedback on what still works well for console access via a > > router dial-up? > > > > We have quite a few sites that have several routers/switches/access devices > > all of which have console/serial connections on them.... We'd like to be > > able to dial-up to a router onsite and then connect to all the other devices > > for out of band control..... We don't want to connect a phone line directly > > via mdoem to each device of course... > > > > Cisco 2511 comes to mind but hoping for something current.... > > > > Thanks, > > > > Paul _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
