Hi guys, I have a PIX 515E.
I setup the PIX as a PPTP VPN server accepting PPTP connections from the outside. I have a Windows XP client on the outside connecting to the internal network using the PIX as the PPTP server. I followed instructions setting up the VPN and the Windows client is able to connect to the PIX and obtain an ip from the ip pool. Problem is, the Windows client is unable to do anything after this. It cannot ping any other machines on the network. I believe this is a routing issue. Can someone on this list confirm if routing is something I have to do separate from the VPN configuration? Ipconfig says that a default gateway is not assigned to the Windows client by the PIX through the PPTP VPN. Route /print shows no routes added by the PPTP. I do not see any PPTP VPN configuration that allows me to setup routes. -- Lyndon Tiu _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/