Absolutely.... just make sure you have enough DRAM though too and you're fine.... sometimes it's easy to confuse the two...
I've gotten burned when you forget about the IOS uncompressing after an upgrade and not having enough DRAM to run...;) Paul -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gert Doering Sent: Thursday, January 03, 2008 4:46 PM To: Bernd Ueberbacher Cc: [email protected] Subject: Re: [c-nsp] Memory requirements question * PGP Signed by an unknown key Hi, On Thu, Jan 03, 2008 at 10:35:55PM +0100, Bernd Ueberbacher wrote: > I just have a short question about memory requirements. > I'd like to upgrade a 2610XM router which has 32 MB of flash. The IOS > image I'd like to use is about 24 MB in size. The IOS upgrade planner > says that 48 MB are required. > The image would fit into the 32 MB of course, but how much space has > to be left free so that a router has enough flash to opperates properly? If the image fits, it fits. That's all there is. Most Cisco routers (I'm not sure about all 8xx series, thus "most") do not use the flash for anything but IOS files, and potentially crashdumps - so there is no need to reserve anything. The upgrade planner is sometimes just way off. gert -- USENET is *not* the non-clickable part of WWW! //www.muc.de/~gert/ Gert Doering - Munich, Germany [EMAIL PROTECTED] fax: +49-89-35655025 [EMAIL PROTECTED] * Unknown Key * 0x65514975 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
