Possibly the feature navigator is accounting for SDM ? Just looking at my home router the SDM installation burns a lot of flash.
dhooper-gw.kal#sh flash System flash directory: File Length Name/status 1 20487336 c1700-advipservicesk9-mz.124-5a.bin 2 1038 home.shtml 3 1830 sdmconfig-1721.cfg 4 102400 home.tar 5 242285 attack-drop.sdf 6 1053184 common.tar 7 4753408 sdm.tar 8 13514 SDM_Backup 9 1020 vlan.dat [26656600 bytes used, 6635684 available, 33292284 total] 32768K bytes of processor board System flash (Read/Write) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bernd Ueberbacher Sent: Friday, 4 January 2008 6:51 AM To: Gert Doering Cc: [email protected] Subject: Re: [c-nsp] Memory requirements question Sweet, dude! :-) And thanks for the fast reply! Greets, Bernd Gert Doering schrieb: > Hi, > > On Thu, Jan 03, 2008 at 10:35:55PM +0100, Bernd Ueberbacher wrote: > >> I just have a short question about memory requirements. >> I'd like to upgrade a 2610XM router which has 32 MB of flash. The IOS >> image I'd like to use is about 24 MB in size. The IOS upgrade planner >> says that 48 MB are required. >> The image would fit into the 32 MB of course, but how much space has to >> be left free so that a router has enough flash to opperates properly? >> > > If the image fits, it fits. That's all there is. Most Cisco routers > (I'm not sure about all 8xx series, thus "most") do not use the flash for > anything but IOS files, and potentially crashdumps - so there is no need > to reserve anything. > > The upgrade planner is sometimes just way off. > > gert > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
