I think it will limit the whole group. You could try to create 5 access-lists, one for each IP, and have 5 rate-limits, one for each IP.
-lmn On Jan 22, 2008 11:13 AM, Richey <[EMAIL PROTECTED]> wrote: > If I do the following will it rate-limit each IP to 1.8Mb or will it limit > the group of IPs to 1.8Mb? I want for each IP to get 1.8Mb. > > > > interface Ethernet1/1 > > description EB1 - Wireless > > ip address 69.18.x.x 255.255.255.224 > > rate-limit input access-group 199 1800000 337500 675000 conform-action > transmit exceed-action drop > > rate-limit output access-group 199 1800000 337500 675000 conform-action > transmit exceed-action drop > > half-duplex > > > > access-list 199 permit ip host 69.18.x.x any > > access-list 199 permit ip host 69.18.x.x any > > access-list 199 permit ip host 69.18.x.x any > > access-list 199 permit ip host 69.18.x.x any > > access-list 199 permit ip host 69.18.x.x any > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
