It will rate-limit traffic matching the ACL. Not individual flows or ips. -- Regards,
Jason Plank CCIE #16560 e: [EMAIL PROTECTED] -------------- Original message ---------------------- From: "Richey" <[EMAIL PROTECTED]> > If I do the following will it rate-limit each IP to 1.8Mb or will it limit > the group of IPs to 1.8Mb? I want for each IP to get 1.8Mb. > > > > interface Ethernet1/1 > > description EB1 - Wireless > > ip address 69.18.x.x 255.255.255.224 > > rate-limit input access-group 199 1800000 337500 675000 conform-action > transmit exceed-action drop > > rate-limit output access-group 199 1800000 337500 675000 conform-action > transmit exceed-action drop > > half-duplex > > > > access-list 199 permit ip host 69.18.x.x any > > access-list 199 permit ip host 69.18.x.x any > > access-list 199 permit ip host 69.18.x.x any > > access-list 199 permit ip host 69.18.x.x any > > access-list 199 permit ip host 69.18.x.x any > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
