Anyone knows when can the 7200VXR support VPLS? thanks.
-lmn On Jan 29, 2008 9:22 AM, Dennis Dubbelman <[EMAIL PROTECTED]> wrote: > For supporting VPLS on a 7600, OSM or ES20 linecards are needed on the > Core facing interfacces. Those cards will handle the label push and pop > for SVI based interfaces. > > You can use your defined hardware as a MPLS Access node and terminate > your PW on a VPLS based 7600 router. This router must terminate the > incoming PW's over a OSM or ES20 linecard. > > Cheers,, > Dennis Dubbelman > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of MKS > Sent: dinsdag 29 januari 2008 15:02 > To: cisco-nsp@puck.nether.net > Subject: [c-nsp] c7600 and VPLS > > Hi > > I'm a bit confused about hardware support for VPLS and cisco 7600. > > If I have only LAN cards e.g. 6724 customer facing and 6704 core facing > does that mean that I have no VPLS support or just not H-VPLS ? > > Can I run some topology of VPLS with only LAN cards (full mesh, > hub-spoke, partial mesh). > > Regards > MKS > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/