hmm... according to http://www-europe.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/twlr_c/wlcgvlan.htm
the config is exactly the one I suggested (and thus the same as on the 1200 APs) for 1800 routers running 12.4T code. the doc mentions some limitations as for the numbers and "modes" of the VLANs, at a first glance this should not affect your scenario. just checked on feature navigator. "wireless enhancements for ISR routers" need 12.4.15T at minimum. you should try this route first. my 0.02 thanks, Enno On Fri, Feb 08, 2008 at 09:35:09AM -0800, matthew zeier wrote: > I must have different code or this box works different. > > I don't have anything like: > > dot11 ssid <ssid> > > mozca-gw01(config)#dot11 ? > aaa Authentication, Authorization, and Accounting > activity-timeout Activity timeout for device classes > arp-cache Enable DOT11 ARP cache > association association > holdoff-time holdoff time for authentication failed clients > igmp Enable DOT11 IGMP related feature > location WISPr Attribute Location-ID > phone Enable dot11 VOIP phones support > priority-map Enable dot11 priority mapping > > Running : > > Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version > 12.4(9)T6, RELEASE SOFTWARE (fc2) > > - mz > > Enno Rey wrote: > >Hi, > > > >some time ago I wrote a hardening guide for 1200 series APs. It includes a > >"segmentation with different SSIDs" section. > >can be found here: > > > >http://www.ernw.de/content/e7/e183/e691/download693/ERNW_hard_cisco_aps_erey_ger.pdf > > > >thanks, > > > >Enno > > > > -- Enno Rey Check out www.troopers08.org! ERNW GmbH - Breslauer Str. 28 - 69124 Heidelberg - www.ernw.de Tel. +49 6221 480390 - Fax 6221 419008 - Cell +49 173 6745902 PGP FP 055F B3F3 FE9D 71DD C0D5 444E C611 033E 3296 1CC1 Handelsregister Heidelberg: HRB 7135 Geschaeftsfuehrer: Roland Fiege, Enno Rey _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
