AMLIATLCORE#remote command switch sh boot BOOT variable = bootdisk:s3223-ipbase_wan-mz.122-18.SXF8.bin,12; CONFIG_FILE variable does not exist BOOTLDR variable does not exist Configuration register is 0x2100
AMLIATLCORE# That may be it, how do we change it??? Jonathan On Tue, Apr 22, 2008 at 10:24 PM, Dale Shaw <[EMAIL PROTECTED]> wrote: > What does "remote command switch sh boot" say the config-register is? > > Is it possible the SP is set to boot to ROMMON, but the RP isn't? > (seems unlikely, since if the RP is 0x2102, a "wr m"/"copy run start" > would sort out the SP confreg value) > > cheers, > Dale > > > > On Wed, Apr 23, 2008 at 12:52 PM, Jonathan Charles <[EMAIL PROTECTED]> wrote: > > We just deployed a 6513E with a Sup720. > > > > It is running IOS, but when it reboots it goes straight into rommon > > and you need to type boot to get it to load... once you do that it > > boots fine... > > > > My worry is that this site has power issues... > > > > Here is some output: > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/