> As far as I remember, you should insert SFP and then reload switch. > If you inserted SFP after boot - SFP port will be disabled, because > onboard 100FX port will be selected as 'active uplink'.
Bingo that was it. I didnt think to restart it, as I didnt think it would be something as simple as that, but after re-starting it I now receive messages about the SFP (unsupported, thank you Cisco) which is a better sign. Will try some different SFPs and see if I can get some joy. Thanks all. :-) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
