Hi Jeff,
On Apr 30, 2008, at 17:01, Jeff Kell wrote:
Kaj Niemi wrote:
The ASA does not support STP. If you run recent enough software you
may be able to use redundant interface pairs (assuming you are
looking for redundancy).
Redundant pairs? On the same box? Is that in 8.x?
The feature is available as of 8.0(2), see
http://www.cisco.com/en/US/docs/security/asa/asa80/release/notes/asarn80.html#wp229690
The typical "redundancy" setup is similar to http://www.cisco.com/univercd/illus/1/69/126669.jpg
(this is actually multiple contexts).
You can lose either of the ASAs and everything keeps on chugging
right along.
But if you lose any ONE of the FOUR switches in this scenario,
you've hosed an entire context.
I'm not particularly fond of contexts although they have their uses in
certain scenarios.
HTH
Kaj
--
Kaj J. Niemi
<[EMAIL PROTECTED]>
+358 45 63 12000
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
