If the device is incapable of understanding IEEE 802.1Q then it will not be able to recognize and interpret the tagged frames, and will only understand the native/untagged vlans. It should only be communicating on the native vlan.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chad Whitten Sent: Wednesday, May 14, 2008 8:44 AM To: [email protected] Subject: [c-nsp] vlan tagging question I have a non-cisco access device connecting to a cisco 3750 via gigE. The 3750 interface is set for 802.1q trunking with two vlans - 100 and 201. Vlan 201 is the native vlan on the cisco interface. Should the access device be tagging packets on vlan 201 or leaving them untagged? -- Chad Whitten Metro Network Solutions (601) 366-6630 Phone (601) 366-6066 Fax (601) 842-6804 Cellular [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
