I have always used the ap-manager interface in my DHCP option 43 configuration. My understanding is that the Management interface is used for controller to controller traffic to terminate EOIP tunnels. I would call your configuration correct now :)
-- Regards, Jason Plank CCIE #16560 e: [EMAIL PROTECTED] -------------- Original message ---------------------- From: "Rupert Finnigan" <[EMAIL PROTECTED]> > Hi, > > Thanks to all who offered advise - It was the IP address in the end. I'd > setup DHCP Option 43 to the ap-manager interface address, and not the > management one. Now that's corrected all is fine. I'm still confused as to > how this particular network has worked in the past though! > > Thanks again, > > Rupert > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
