On Tue, Jun 03, 2008 at 08:40:17PM +0200, Peter Rathlev wrote: > On Tue, 2008-06-03 at 15:20 -0300, Everton Diniz wrote: > > What is the difference between "bandwidth" and "priority" command in > > policy-map? > > > > class REAL-TIME > > priority 722 > > class SAP > > bandwidth 389 > > A priority queue gets served before any non-priority queues. The > "bandwidth" queues uses WFQ. Use the former for latency critical things, > like VoIP.
And cisco.com has a doc. on this: Comparing the bandwidth and priority Commands of a QoS Service Policy http://www.cisco.com/en/US/tech/tk543/tk757/technologies_tech_note09186a0080103eae.shtml Hope this helps. Cheers, Everton _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
