Everton Diniz <> wrote on Tuesday, June 03, 2008 8:20 PM: > Hi all, > > What is the difference between "bandwidth" and "priority" command in > policy-map? > > class REAL-TIME > priority 722 > class SAP > bandwidth 389
short answer: "priority" configures a low-latency priority queue (along with a policer dropping traffic above the configured rate). "bandwidth" configures the queue weights to implement a minimum bandwidth guarantee for the class. More traffic can be sent if BW is available.. more verbose: http://www.cisco.com/en/US/tech/tk543/tk757/technologies_tech_note09186a 0080103eae.shtml oli _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/