Hello,
I received this messages on my 6500:
*May 26 12:44:26 MET-DST: %SIBYTE-CFC3-3-CORRECTABLE_ECC_ERR: A
correctable ECC error has occurred, A_BUS_L2_ERRORS: 0x0,
A_BUS_MEMIO_ERRORS: 0xFF, A_SCD_BUS_ERR_STATUS: 0xC0DC3000
*Jun 10 14:12:48 MET-DST: %SIBYTE-CFC3-3-CORRECTABLE_ECC_ERR: A
correctable ECC error has occurred, A_BUS_L2_ERRORS: 0x0,
A_BUS_MEMIO_ERRORS: 0xFF, A_SCD_BUS_ERR_STATUS: 0xC0DC3000
How can i know which card send this messages? What can i do?
Thanks
Laszlo
System image file is "sup-bootflash:s72033-ipservicesk9-mz.122-18.SXF11.bin"
cisco WS-C6506-E (R7000) processor (revision 1.0) with 983008K/65536K
bytes of memory.
Processor board ID SAL09190KCR
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
1 Virtual Ethernet/IEEE 802.3 interface
52 Gigabit Ethernet/IEEE 802.3 interfaces
8 Ten Gigabit Ethernet/IEEE 802.3 interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
>sh module
Mod Ports Card Type Model
--- ----- -------------------------------------- ------------------
-----------
1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP
2 24 CEF720 24 port 1000mb SFP WS-X6724-SFP
3 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE
4 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE
5 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL
6 2 Supervisor Engine 720 (Hot) WS-SUP720-3BXL
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
