I'm probably missing something really obvious here, but I'm trying to do a monitor session on a LACP port channel. sh etherchannel 16 port-channel says the following:
houcore5#sh etherchannel 16 port-channel Port-channels in the group: ---------------------- Port-channel: Po16 (Primary Aggregator) ------------ Age of the Port-channel = 11d:00h:49m:54s Logical slot/port = 14/16 Number of ports = 0 HotStandBy port = null Port state = Port-channel Ag-Not-Inuse Protocol = LACP Fast-switchover = disabled Time since last port bundled: 11d:00h:49m:19s Gi9/18 Time since last port Un-bundled: 11d:00h:47m:20s Gi9/18 Port-channel: Po16C ------------ Age of the Port-channel = 11d:00h:48m:23s Logical slot/port = 14/19 Number of ports = 4 HotStandBy port = null Doing a "monitor session 1 source interface po16" yields no traffic on the destination port; not surprising, as the interface is marked down/down. Po16C is marked as up/up, but "monitor session 1 source interface po16C" doesn't seem to be acceptable to the command interpreter. What am I doing wrong? _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/