What about the return path? What did you do to get traffic back into the VRF?
Also, what do you mean it does not work as the next hop? Did the static route not appear in the routing table after you added it? Can you give us some config output/"show ip route vrf" output? ---- Jason Berenson <[EMAIL PROTECTED]> wrote: > Oliver, > > I tried that but it doesn't seem to work. The IP that exists in the > global routing table (just an interface on the router) is not pingable > from within the VRF. It also does not work as a next hop. > > -Jason > > Oliver Boehmer (oboehmer) wrote: > > Jason Berenson <> wrote on Monday, July 14, 2008 7:37 AM: > > > > > >> Greetings, > >> > >> I know how to route leak between VRFs with BGP but is it possible to > >> set a default route within a VRF pointing to an IP in the global > >> routing table? If so can anyone point me to some good documentation > >> or perhaps a sample snippit? > >> > > > > ip route vrf FOO 0.0.0.0 0.0.0.0 <next-hop> global > > > > the next-hop must not be a local address of the PE.. > > > > oli > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
