Hello, I have a 2621 router running 12.3(26) and I would like to setup load sharing to multiple adsl lines. When I do a traceroute on the router it randomly picks a dsl line and seems to work fine. But when I do traceroute tests from a workstation it always seems to take the same adsl line. Is there something else I need to add to the configuration to make it pick random lines, or is there a timeout of some sorts before it will select the next ip route
Here is my config: ! interface FastEthernet0/0 ip address 10.1.10.1 255.255.255.0 duplex auto speed auto ! interface FastEthernet0/1 ip address 192.168.10.1 255.255.255.0 duplex auto speed auto ! ip http server ip classless ip route 0.0.0.0 0.0.0.0 192.168.10.10 ip route 0.0.0.0 0.0.0.0 192.168.10.11 ! The two adsl modem/routers I have are 192.168.10.10, and 192.168.10.11 Thanks, Dan. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
