ip load-sharing per-packet I tried adding this to F0/1 and the trace route works now(it randomly picks either line), but there seems to be issues with maybe the MTU? If I try to browse websites i get page errors and some of the pictures and pages don't load.
Any ideas? Thanks, Dan. On Fri, Aug 15, 2008 at 12:12 PM, Rodney Dunn <[EMAIL PROTECTED]> wrote: > Try ip load-sharing per-packet on both egress interfaces. > > On Fri, Aug 15, 2008 at 12:00:46PM -0500, Dan Letkeman wrote: >> Hello, >> >> I have a 2621 router running 12.3(26) and I would like to setup load >> sharing to multiple adsl lines. When I do a traceroute on the router >> it randomly picks a dsl line and seems to work fine. But when I do >> traceroute tests from a workstation it always seems to take the same >> adsl line. Is there something else I need to add to the configuration >> to make it pick random lines, or is there a timeout of some sorts >> before it will select the next ip route >> >> Here is my config: >> >> ! >> interface FastEthernet0/0 >> ip address 10.1.10.1 255.255.255.0 >> duplex auto >> speed auto >> ! >> interface FastEthernet0/1 >> ip address 192.168.10.1 255.255.255.0 >> duplex auto >> speed auto >> ! >> ip http server >> ip classless >> ip route 0.0.0.0 0.0.0.0 192.168.10.10 >> ip route 0.0.0.0 0.0.0.0 192.168.10.11 >> ! >> >> The two adsl modem/routers I have are 192.168.10.10, and 192.168.10.11 >> >> Thanks, >> Dan. >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
