Are you in transparent vtp mode?
On Tue, Aug 19, 2008 at 9:48 PM, Alex Balashov <[EMAIL PROTECTED]> wrote: > For some reason, my Catalyst 2900 series (WS-C2924-XL) does not like VLAN > IDs higher than 1005: > > > sw01(config)#switchport trunk allowed vlan add 1202 > Command rejected: Bad VLAN list - character #5 (EOL) delimits a VLAN > number (1202) out of the range 1 to 1005. > > This is with a trunking interface: > > interface FastEthernet0/1 > duplex full > speed 100 > switchport trunk encapsulation dot1q > switchport trunk allowed vlan 1,3,100,1002-1005 > switchport mode trunk > > IOS is 12.0(5)WC8 (C2900XL-C3H2S-M). > > I'm pretty sure this has already been asked a thousand times, but how do I > get around this issue so I can get support for the extended VLAN IDs up to > 4096? > > -- > Alex Balashov > Evariste Systems > Web : http://www.evaristesys.com/ > Tel : (+1) (678) 954-0670 > Direct : (+1) (678) 954-0671 > Mobile : (+1) (706) 338-8599 > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
