You can also use JUNOS olive. http://juniper.cluepon.net/index.php/Olive
Regards, Masood -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Cory Ayers Sent: Sunday, December 21, 2008 1:45 AM To: Ang Kah Yik Cc: [email protected] Subject: Re: [c-nsp] RSP4 as route server? - seeking suggestions and opinions >I've only been recently tasked with looking into possible (re)uses for this >box so I'm not sure how it managed to handle 2 sets of full routes either. 256M RAM will barely handle one BGP feed filtered to /23 (140k routes) >The first thing that came to mind when tasked with this was actually >Quagga/OpenBGPD. There appears to be a discussion on Linux Gigabit routers >on the NANOG-ML but the discussion seems skewed towards forwarding >performance rather than BGP scalability. If you're just looking for data gathering, go with Quagga. We've got an old SOHO box (533Mhz, 512M RAM, 512M Flash drive) running a lean install of Fedora with 8 BGP feeds (somewhat filtered) inbound, and another session to route-views. This replaced a 7200 NPE-300 w/256M that couldn't keep up a few years back. Cory _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
