Peter Rathlev a écrit :
On Tue, 2009-01-27 at 15:49 +0000, Kevin Edmunds wrote:
I have a 6500 which still runs CatOS for switching and IOS for routing, is
it possible make standard switch ports into routed ports in this current
setup? (just like a 3750 for example)
AFAIK: No. When running native IOS the system actually reserves an
internal VLAN ("show vlan internal usage") for routed ports. When using
hybrid you'd probably have to reserve some VLAN for this, make the
physical port an access port in this VLAN and then configure the SVI on
the MSFC.
The CatOS CLI wouldn't stop you from using this VLAN on another port,
e.g. an open trunk, so it's not completely the same. But I think it
would work in the same way inside the box.
Regards,
Peter
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
Also you'd better make sure you don't send any BPDU off that port, in
order to truly emulate a routed port.
Depending on what you're connecting too, thought.
Jerome Covini
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
