Anyone know if the show dot11 network-map output on 1200 series access points shows either;
1. neighbouring access points it can see over the dot11 radio interface 2. neighbouring access points it can see over the wire within the same subnet I am thinking option 2 but cannot find anything conclusive. Many thanks in advance Mike Company Registration number: 197807; Place of Registration: England; Registered office address: Weybridge Business Park, Addlestone Road, Addlestone, Surrey, KT15 2UP Confidentiality Notice: This message, together with its annexes, contains information to be deemed strictly confidential, that may be legally privileged and is destined only to the addressee(s) identified above who only may use, copy and, under his/their responsibility, further disseminate it. If anyone received this message by mistake or reads it without entitlement is forewarned that keeping, copying, disseminating or distributing this message to persons other than the addressee(s) is strictly forbidden and is asked to transmit it immediately to the sender and to erase the original message received. Thank you. Please consider the environment before you print this message. Thank you. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
