As strange as this sounds, I have a need to be assigned an address on
a Cat6500 Running IOS via dhcp (to a vlan or a dedicated port). On
most routers running IOS the command syntax is, "ip address dhcp" as
just about anyone knows but on the sups running IOS (tested sup1a-ge/
MSFC1, sup2 and sup720s) I have not found a way to be assigned an
address.
I can only assume this is because no one in their right mind would
ever do this on this platform but my install is requiring such.
Before I try a flexwan with a PA-FE in it has anyone out there had
this issue and if so would you be so kind to pass along a solution if
there is one.
Thanks in advance for the time and help. //db
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
