On Sat, 2009-05-23 at 10:10 +1000, Dale Shaw wrote: > On Sat, May 23, 2009 at 2:09 AM, Dan Benson <dben...@swingpad.com> wrote: > > Safe to assume I am up the river on this one then? Thanks. //db > > The command lookup tool [1] suggests the 'ip address dhcp' command is > available in 12.2SX and 12.2SR trains, but it "depends on your feature > set, platform, and platform hardware" > > Have a play around with the feature navigator tool [2], using the > "DHCP Client" feature and your specific platform(s) and IOS as > filters. Sometimes Feature Navigator tells lies, but generally steers > you in the right direction :-)
Well, according to FN the SXF Advanced IP Services should support the command, but it doesn't work for me at least. One could open a TAC case to either have FN corrected or have the command implemented. Regards, Peter _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/