> > > > Setup: Two directly connected Sup32's directly connected one running > 12.2-33.SXH5, the other 12.2-33.SXI1 otherwise identical > configurations. > Goal: Test (new) MPLS configuration using EoMPLS (xconnect) between > G4/2 > on each. I want to transport 1G over a 10G link between two sites. > > Problem: The VC won't come up. Labels don't appear to be generated. Not > sure what knob to twiddle to make it happy. LDP appears to see its > neighbor, but no MPLS adjacency appears. I am guessing I'm missing > something dead obvious. >
I gather the g4/2 interfaces are tied together. You need inbound interfaces. These are the ones on which you do the xconnect. A L2 interface on one router gets labelled, crosses g4/2 to g4/2 and then gets 'xconnected' to the outbound l2 interface. -- Scanned for viruses and dangerous content at http://www.oneunified.net and is believed to be clean. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/