hi the vc still is up,but the eompls does't work suddenly. i got the show message on the cli
Local interface: VFI SDH-NEC VFI up MPLS VC type is VFI, interworking type is Ethernet Destination address: 192.168.4.16, VC ID: 807, VC status: up Output interface: Te2/0/0, imposed label stack {185 188} Preferred path: not configured Default path: active Next hop: 192.168.128.14 Create time: 19w4d, last status change time: 17:31:07 Signaling protocol: LDP, peer 192.168.4.16:0 up Targeted Hello: 192.168.0.1(LDP Id) -> 192.168.4.16 MPLS VC labels: local 336, remote 188 Group ID: local 0, remote 0 MTU: local 1500, remote 1500 Remote interface description: Sequencing: receive disabled, send disabled VC statistics: packet totals: receive 4016946, send 9576394 byte totals: receive 427480129, send 2838427498 packet drops: receive 0, send 0 sh mpls l2transport vc VFI SDH-NEC VFI 192.168.4.16 807 UP seems it does not have any issue here, except tunnel lable can not be found .what should i do for the further troubleshooting? _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/