On Thu, 2009-08-27 at 00:07 +0200, Gert Doering wrote: > HSRP with IPv6 is there on IOS, VRRP with IPv6 is there on JunOS and > (as far as I understand) "coming soon" to IOS.
yep, works like a charm on Junos, same sub-second failover as on VRRP for v4. dan...@jun1.xxxx> show vrrp interface xe-1/0/0.28 Physical interface: xe-1/0/0, Unit: 28, Vlan-id: 28, Address: 2001:XXX:3:1c::3/64 Index: 169, SNMP ifIndex: 182, VRRP-Traps: enabled Interface state: up, Group: 1, State: master Priority: 150, Advertisement interval: 1, Authentication type: none Delay threshold: 100, Computed send rate: 0 Preempt: yes, Preempt hold time: 120 Accept-data mode: yes, VIP count: 2, VIP: fe80::1:1, 2001:XXX:3:1c::1 Advertisement Timer: 0.040s, Master router: fe80::3 Virtual router uptime: 1d 07:08, Master router uptime: 1d 07:06 Virtual Mac: 00:00:5e:00:02:01 [...] No real experience with HSRP though, can anyone shed some light on that? I understand it only works for link-local addresses? --Daniel. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/