Peter Rathlev wrote:
On Thu, 2009-11-19 at 13:23 +0100, Aled Morris wrote:
Have you looked at NM-CEM-4TE1 for the 2800?
I've looked briefly at it, but it only seems to have RJ45 connectors[1],
not BNC for coax. Otherwise it seems to fit the purpose.
What can one do to take an E1 circuit from coax?
Use the Cisco part number CAB-E1-RJ45BNC= or generic equivalent to
connect to the RJ-45 on the router and the BNC connectors on the E1
smartjack.
--
--
Jay Hennigan - CCIE #7880 - Network Engineering - j...@impulse.net
Impulse Internet Service - http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
