Mikhail, I recommend you open a TAC case, as this could be a hardware problem, but it requires some debugging...
Arie -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Mikhail Schedrin Sent: Wednesday, March 03, 2010 11:46 To: cisco-nsp@puck.nether.net Subject: [c-nsp] SCE 8000 with 2*SCM-E Hi. Does anybody have the experince of using SCE8000 with two SCM-E modules? We got the second SCM-E couple of days ago and SCE always boots in recovery mode, when I install the second module. I could not find any documentation about installing and configuring the second SCM-E, I think it should work out of the box. Actually it does not. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/