Hello Experts We have a requirement in which CE routers for MPLS WAN connection need to have Netflow enabled on them. As per the WAN throughput requiremnts we have selected ISR G2 ( 1941,2951 and 3925).
Now is there anything else that we need to consider while considering the support for netflow and the additional CPU load that will be introduced. All the devices are at the standard hardware config, and the IOS is 15.0(1M) with IP Base Licenceing Thanks Regards, Jayaprakash KC This e-mail and any files transmitted with it are for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. Any unauthorized review, use, disclosure,dissemination, forwarding, printing or copying of this email or any action taken in reliance on this e-mail is strictly prohibited and may be unlawful. The recipient acknowledges that Bharti Airtel Limited or its subsidiaries and associated companies(collectively "Bharti Airtel Limited"),are unable to exercise control or ensure or guarantee the integrity of/overthe contents of the information contained in e-mail transmissions and further acknowledges that any views expressed in this message are those of the individual sender and no binding nature of the message shall be implied or assumed unless the sender does so expressly with due authority of Bharti Airtel Limited. Before opening any attachments please check them for viruses and defects. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
