I cannot find protocol pack for 3.6. It is required to upgrade from 3.5.5 as Iunderstood. Does anyone have the solutiopn for this problem?
2010/4/23 Ruslan Pustovoytov <ru...@inbox.ru> > Mikhail, I have no 3.5.5 soft. > Our cisco partner give me release notes for 3.6.0 where cisco announce > 30gig performance and 16M flows for 2 SCME > So, I do not see any reason to stay on 3.5.5 > > > Did it work on SCOS 3.5.5 or only in 3.6? >> >> On 22 April 2010 17:16, Ruslan Pustovoytov <ru...@inbox.ru <mailto: >> ru...@inbox.ru>> wrote: >> >> Yes. >> >> Did anyone try 2 SCME-E modules in one cassis with new software? >> On 22 April 2010 15:41, Ruslan Pustovoytov <ru...@inbox.ru >> <mailto:ru...@inbox.ru> <mailto:ru...@inbox.ru >> >> <mailto:ru...@inbox.ru>>> wrote: >> >> We test this release in production from 20 april. >> I see that bypass do not work if I take out any optics >> from SIP. >> It work only when I reload SCE or take out SIP from chassis. >> But I have no big experience with SCE. >> >> >> >> Did anybody try this release in production? >> >> 2010/4/17 Yann Gauteron <ygaute...@gmail.com >> <mailto:ygaute...@gmail.com> >> <mailto:ygaute...@gmail.com <mailto:ygaute...@gmail.com>>> >> >> >> >> 3.6 is out since Tuesday this week :-) >> >> 2010/3/18 Mikhail Schedrin <msched...@gmail.com >> <mailto:msched...@gmail.com> >> <mailto:msched...@gmail.com >> >> <mailto:msched...@gmail.com>>> >> >> >> Sorry that I didn't answer so much time. >> As I got to know from cisco >> engineers 2 SCMs are >> supported only by >> software >> 3.6 that hasn't released yet. >> I did open TAC case, they don't know that 2 >> SCMs are >> not suported by >> 3.5.5. >> They also do not have 2 SCMs in a lab to test it :( >> >> On 3 March 2010 19:17, Ghattas Jacob >> <gates...@gmail.com <mailto:gates...@gmail.com> >> <mailto:gates...@gmail.com <mailto:gates...@gmail.com>>> wrote: >> >> Mikhail, >> Be sure both sce have the same pkg installed >> before you insert the >> second >> one to the sce. >> Which version are you running as it should >> be 3.6 >> and higher... >> >> Jacob >> >> >> On Wed, Mar 3, 2010 at 5:17 PM, Arie Vayner >> (avayner) < >> >> avay...@cisco.com<mailto: >> avay...@cisco.com> >> <mailto:avay...@cisco.com <mailto:avay...@cisco.com>>>wrote: >> >> >> Mikhail, >> >> I recommend you open a TAC case, as >> this could >> be a hardware problem, >> but it requires some debugging... >> >> Arie >> >> -----Original Message----- >> From: cisco-nsp-boun...@puck.nether.net >> <mailto:cisco-nsp-boun...@puck.nether.net> >> <mailto: >> cisco-nsp-boun...@puck.nether.net >> <mailto:cisco-nsp-boun...@puck.nether.net>> >> [mailto: >> cisco-nsp-boun...@puck.nether.net >> <mailto:cisco-nsp-boun...@puck.nether.net> >> <mailto: >> cisco-nsp-boun...@puck.nether.net >> <mailto:cisco-nsp-boun...@puck.nether.net>>] On >> Behalf Of Mikhail >> Schedrin >> Sent: Wednesday, >> March 03, 2010 11:46 >> To: cisco-nsp@puck.nether.net >> <mailto:cisco-nsp@puck.nether.net> >> <mailto:cisco-nsp@puck.nether.net >> <mailto:cisco-nsp@puck.nether.net>> >> >> Subject: [c-nsp] SCE 8000 with 2*SCM-E >> >> Hi. >> Does anybody have the experince of using >> SCE8000 with two SCM-E >> modules? >> We >> got the second SCM-E couple of days ago and >> SCE always boots in >> recovery >> mode, when I >> install the second module. >> I could not find any documentation about >> installing and configuring the >> second SCM-E, I think it should work out of >> the box. Actually it does >> not. >> >> _______________________________________________ >> cisco-nsp mailing list >> cisco-nsp@puck.nether.net >> <mailto:cisco-nsp@puck.nether.net> >> <mailto:cisco-nsp@puck.nether.net >> <mailto:cisco-nsp@puck.nether.net>> >> >> >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at >> http://puck.nether.net/pipermail/cisco-nsp/ >> >> >> _______________________________________________ >> cisco-nsp mailing list >> cisco-nsp@puck.nether.net >> <mailto:cisco-nsp@puck.nether.net> >> <mailto:cisco-nsp@puck.nether.net >> <mailto:cisco-nsp@puck.nether.net>> >> >> >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at >> http://puck.nether.net/pipermail/cisco-nsp/ >> >> >> -- >> С уважением, >> Щедрин Михаил >> Начальник отдела ТП2 >> SkyNet Telecom http://sknt.ru >> Санкт-Петербург >> тел. +7 812 600-75-35 ext. 554 >> моб. +7 911 934-79-83 >> _______________________________________________ >> cisco-nsp mailing list >> cisco-nsp@puck.nether.net <mailto:cisco-nsp@puck.nether.net> >> <mailto:cisco-nsp@puck.nether.net >> <mailto:cisco-nsp@puck.nether.net>> >> >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at >> http://puck.nether.net/pipermail/cisco-nsp/ >> >> >> >> >> _______________________________________________ >> cisco-nsp mailing list cisco-nsp@puck.nether.net >> <mailto:cisco-nsp@puck.nether.net> >> <mailto:cisco-nsp@puck.nether.net >> <mailto:cisco-nsp@puck.nether.net>> >> >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> >> >> >> -- С уважением, >> Щедрин Михаил >> Начальник отдела ТП2 >> SkyNet Telecom http://sknt.ru >> Санкт-Петербург >> тел. +7 812 600-75-35 ext. 554 >> моб. +7 911 934-79-83 >> >> >> _______________________________________________ >> cisco-nsp mailing list cisco-nsp@puck.nether.net >> <mailto:cisco-nsp@puck.nether.net> >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> >> >> >> -- >> С уважением, >> Щедрин Михаил >> >> > -- С уважением, Щедрин Михаил _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/