actually i want to control that traffic which is exceeding 128kbps from source to destination
On Tue, May 18, 2010 at 3:11 PM, Aftab Siddiqui <[email protected]>wrote: > Which platform you are using? Policy map would help in your scenario. > > ip access-list extended Data > permit ip host <192.168.0.14 192.168.11.66> > permit ip host <192.168.11.66 192.168.0.14> > > class-map match-all Data > match access-group name Data > > policy-map > class Data > police cir <rate-limit> bc <value> be <value> conform-action > set-dscp-transmit default exceed-action drop violate-action drop > > Apply the service policy on the interface as per the acl you have created, > do keep in my mind the source and destination. > > Regards, > > Aftab A. Siddiqui > > > On Tue, May 18, 2010 at 2:11 PM, vijay gore <[email protected]>wrote: > >> Hello, >> >> Router#sho ip accounting >> Source Destination Packets Bytes >> 192.168.0.7 192.168.11.75 65 88652 >> 192.168.0.14 192.168.11.66 1297 1254407 >> >> i want to give the access rate limit for 192.168.11.66 which is accessing >> 192.168.0.14 >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
