On Sun, 2010-07-25 at 20:38 +0100, Gary Smith wrote: > ip access-list extended Network10 > permit tcp any 192.168.10.0 0.0.0.255 > permit tcp 192.168.10.0 0.0.0.255 any [...] > As I understand it, this should work - however, from the outside, trying > to ping the address of Di1 results in no replies. Also, VLAN10 can't > route over the connection, instead still routing over Di0. > > What am I doing wrong?
The access list matches only TCP traffic? -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
