David, > >> In newer releases (where the import code was rewritten), the command is > >> "import path limit <n>" > > Would be interested to know what visible differences there are in the > behaviour of this (existing vs rewrite)
take a look at "BGP Event-Based VPN Import" feature doc (http://www.cisco.com/en/US/docs/ios/ios_xe/iproute_bgp/configuration/gu ide/irg_event_vpn_import_xe.html) The most important change is that there is no periodic import scanner any longer, so vrf import is much faster. finally :-) > Would be interested to know if the following two are equivalent in SR: > > maximum-paths ibgp unequal-cost 1 import 2 > and > maximum-paths import 2 > > (i.e if the objective is only to import 2 paths from the VRF but not to do > any FIB multipathing) Yes.. "maximum-paths ibgp 1 import 2" would also be equivalent. > Also, why is this per-vrf? Is it possible to set this generically for all > vrfs? (perhaps through vpnv4 af?) a global setting for all vrfs would be nice, indeed. unfortunately not there (yet?). oli _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
