Hi Jeferson, If you do not have any IPv4 address configured on the box, you absolutely need to configure the router-id explicitly.
Regards Le 2010-08-12 à 10:50, Jeferson Guardia a écrit : > > Hi Group, > > A doubt/curiosity, what happens in a router that you are setting up IGP's , > and you dont hardcode the router-id, thus > it will look for an IPv4 address to use as a router-id, but what if I dont > have any IPv4 address configured? Where will > it come from? > > Rgs, > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/