If a router has no IPv4 addresses to 'borrow' and use as a convenient 32bit value, you must manually configure the RID.
/TJ On Thu, Aug 12, 2010 at 10:50, Jeferson Guardia <jefers...@gmail.com> wrote: > Hi Group, > > A doubt/curiosity, what happens in a router that you are setting up IGP's , > and you dont hardcode the router-id, thus > it will look for an IPv4 address to use as a router-id, but what if I dont > have any IPv4 address configured? Where will > it come from? > > Rgs, > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/