On Tue, 2010-10-19 at 15:48 -0500, Jeff Wojciechowski wrote: > So - that begs the question - how can I see the CPU utilization on the > 2 server switches (which happen to be about 20 degrees F hotter than > the client switches so I know they are working harder)?
You could use "remote command <N> show proc cpu" where <N> is the member index. But even though the hotter switches might have a higher switching load you probably can't see any correlation to the CPU load. The devices are strictly[0] hardware forwarding. -- Peter [0]: Usual disclaimer for "unsupported" configurations. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/