>You could use "remote command <N> show proc cpu" where <N> is the member >index. But even though the hotter switches might have a higher switching load >you probably can't see any correlation to the CPU load. The devices are >strictly[0] hardware forwarding.
That works - thanks Peter! -Jeff This electronic mail (including any attachments) may contain information that is privileged, confidential, or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please delete the original message in its entirety (including any attachments) and notify us immediately by reply email so that we may correct our internal records. Midland Paper Company accepts no responsibility for any loss or damage from use of this electronic mail, including any damage resulting from a computer virus. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
