Are there folks out there who have been forced to run their Catalyst 6500-E switches on 120V circuits?
Other than the expected lower power output and the inability to fully populate the switches (depending on model), are there any issues with running on the 120V circuits? Expected configuration is as follows: 6509-E with dual VS-720-10G Supervisors 3 x 6748-GE-TX line cards 1 x IDSM2 2 x 6000W AC PS, each with dual 120V circuits According to Cisco's Power Calculator, the switch should be able to run in redundant power mode with the above configuration with less than 80% utilization on one power supply. Thank you for any feedback. Vijay Ramcharan _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
